Description Downloads ECU electronic injection system in automotive vehicles. The FT550 is an engine fuel control and monitoring system from FuelTech: electronic fuel injection, integrated dashboard, data acquisition and power management.  FT550 Manual  FTManager Software  FT550 CAD 

Unterminated harness for FT550: A & B Harnesses - Both of these harnesses are required. B Harness - Ordered by itself only if upgrading from FT450.

Description Downloads  FT600 Connector Kit Manual The FT600 Connector Kit is recommended for those who have upgraded to the FT600 ECU and want to modify their existing harness for the new FT600 connectors. Kit includes: (2) FT600 Connectors (A & B) (70) FT600 Terminals (1)...

Description Downloads A FT600 is FuelTech’s most advanced engine control and monitoring system. It is an ECU, dashboard, data acquisition and power management system!  FT600 Manual FTManager Software FT600 CAD 

Simplify installation of your FT600 with this steering column mounting bracket. Size: 1.250"

Grip features a 1-7/32-inches/32mm diameter 13-inches/365mm Overall diameter Deep-dish design with 1-3/8-inches/35mm distance from the mounting surface to the centerline of the steering wheel grip Central mounting surface is designed to reduce even more weight and can be used on hubs with a 3-...

Diameter - 365mm Grip diameter - 32mm Deep dish (depth from center surface to grip) - 55mm Central fixing point designed to be lightweight and support 3 or 6 bolt pattern hubs - hub not included Universal bolt pattern, compatible with any 3 or...

Hand-stitched ultrasuede grip Ultrasuede center red stripe Marine grade aluminum structure Ergonomic grip Universal bolt pattern, compatible with any 3 or 6 bolt steering wheel hubs Deep dish (depth from center surface to grip) - 55mm Diameter - 345mm Weight: 930g  *** Paddles or...

Compatible with WB-O2 Nano and the new NanoPRO. For use with the Bosch LSU4.2 O2 sensor. Length: 2m (6.5ft) - Recommended size for most applications.1m (3ft)4.5m (15ft)

Description Downloads Harness & sensor options not included, see options below.The evolution in O2-sensor conditioners. With a new design, the FuelTech NanoPRO is able to condition and read 5 different models of wide band lambda O2 sensors:● BOSCH LSU 4.2 (sensor, harness)● BOSCH LSU...

Compatible with FuelTech NanoPRO product, not compatible with FuelTech WB-O2 Nano. This harness is specifically designed for use with the Bosch LSU4.9 O2 sensor. Lengths: 6.5ft (2m) - Typical size for most applications 15ft (4.5m)  

Typically used to monitor fuel, oil, and wastegate pressure. *Not compatible with PRO500/PRO600 or other complete FuelTech engine harnesses. Use PS-150 for these applications. TECHNICAL DESCRIPTION Output: 1-5V Supply: 12V Range: 0-10 bar Thread size: 1/8" NPT Connector Pinout: 1 - Signal 2 - Ground 3...

Description Typically used to monitor fuel, oil, and wastegate pressure. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-150 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal SPECS Performance Long Term Drift: 0.2% FS/YR (non-cumulative) Accuracy: 0.25%...

Description Typically used for precise fuel pressure monitoring on carburetor applications. Multiple sensors can be used for multiple stages of wet nitrous fuel pressure monitoring. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-30 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B...

FuelTech's billet remote pressure sensor mounting block is the perfect solution to mount your pressure sensors in one common place, Each port is individually connected from top to bottom allowing you to run up to 4 separate pressure sensors on a small light weight...

Description Downloads Designed to use with FuelTech FT550/FT600 on board conditioner, to perform powershifts. Detects knob deformation to perform ignition cut/timing retard H-pattern, sequential or inline application CNC machined *Power shift functions: only compatible with dog engagement gearboxes (Liberty Pro-Shift, Liberty Face Plate, etc.)....

Description Downloads Keypad with 4 configurable buttons and multicolor backlight SwitchPanel Manual  Switchpanel-4 Mini CAD Features SwitchPanel Mini is a compact and multicolor backlight button panel that communicates with the PowerFT line ECUs (FT450, FT500, FT500LITE, FT550 and FT600) through FTCAN 2.0.Using SwitchPanel-4 Mini,...

Description Downloads Keypad with 5 configurable buttons and multicolor backlight SwitchPanel Manual  SwitchPanel-5 Mini CAD Features SwitchPanel Mini is a compact and multicolor backlight button panel that communicates with the PowerFT line ECUs (FT450, FT500, FT500LITE, FT550 and FT600) through FTCAN 2.0.Using SwitchPanel-4 Mini,...

Description Downloads Keypad with 8 configurable buttons and multicolor backlight SwitchPanel Manual  SwitchPanel-8 Mini CAD Features SwitchPanel Mini is a compact and multicolor backlight button panel that communicates with the PowerFT line ECUs (FT450, FT500, FT500LITE, FT550 and FT600) through FTCAN 2.0.Using SwitchPanel-4 Mini,...

High quality stainless steel temperature sensor. These sensors are known for their accuracy and can be used in harsh environments. Most commonly used to measure air and fluid temperatures. Supply: Ground Range: 0-300°F Thread size: 1/8" NPT