High quality stainless steel temperature sensor. These sensors are known for their accuracy and can be used in harsh environments. Most commonly used to measure air and fluid temperatures. Supply: Ground Range: 0-300°F Thread size: 1/8" NPT

This sensor is needed if you are exceeding the limit of your internal map sensor on your ECU or want to run an external map sensor on your setup. Reads up to 135.3 psi! Output: 0.5-4.5V Supply: 5V Range: -14.7 psi to +135.3 psi...

GM style water temperature sensor. Standard water/coolant sensor for all FuelTech ECUs. Thread size: 3/8" NPT

Description Use with FT600 / FT550 / FT500 / FT500LITE / FT450 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT Can not be used with CO2. For drag race applications, use our Boost Controller Dual Valve Block. Wastegate pressure sensor...

Description Manual Thermocouple Exposed Tip The new FuelTech Thermocouple with Exposed Tip offers faster and more accurate temperature reading for exhaust gases. The exposed tip gives the sensor a lower thermal inertia, allowing for faster reading during temperature variation. Temperature range: 32°F to 2200°F...

The new FuelTech Air/Liquid Thermocouple offers accurate temperature reading for oil, coolant and intake air.Temperature range: 32°F to 2200°FWire lengths: 24”Thread size: 1/8" NPTTip length: .300"The K-Type EGT Probe is compatible with the EGT-8 CAN, EGT-4 and ETM-1 conditioners.

Description Downloads The FuelTech Cylinder Head Temperature Thermocouple offers faster and more accurate temperature reading for engine head temperature. The ring tip gives the sensor a lower thermal inertia and easier way to bolt to the head, allowing faster reading during temperature variation of...

FuelTech's billet vacuum distribution manifold is the perfect solution for running and organizing all of the vacuum lines on your race car. With 7 vacuum ports (4 x 1/8 npt and 3 x 1/4 npt) there is plenty of room to run all of...

Description Downloads  FT550 Connector Kit Manual The FT550 Connector Kit is recommended for those who have upgraded to the FT550 ECU and want to modify their existing harness for the new FT550 connectors. Kit includes: (2) FT550 Connectors (A & B) (56) FT550 Terminals (1)...

Description Downloads  FT450 Connector Kit Manual The FT450 Connector Kit is recommended for those who have upgraded to the FT450 ECU and want to modify their existing harness for the new FT450 connector. Kit includes: (1) FT450/550 Connectors (A) (28) FT450 Terminals (1) CAN A...

FuelTech's billet remote pressure sensor mounting block is the perfect solution to mount your pressure sensors in one common place, Each port is individually connected from top to bottom allowing you to run up to 4 separate pressure sensors on a small light weight...

Description Downloads  FT600 Connector Kit Manual The FT600 Connector Kit is recommended for those who have upgraded to the FT600 ECU and want to modify their existing harness for the new FT600 connectors. Kit includes: (2) FT600 Connectors (A & B) (70) FT600 Terminals (1)...

Simplify installation of your FT450 or FT550 with this steering column mounting bracket. Size: 1.250"

Perfect mounting solution for your FT450 & FT550 ECU. Modifications are required to fit specific vehicle. Approximate Dimensions: 18" x 12"

Simplify installation of your FT600 with this steering column mounting bracket. Size: 1.250"

Diameter - 365mm Grip diameter - 32mm Deep dish (depth from center surface to grip) - 55mm Central fixing point designed to be lightweight and support 3 or 6 bolt pattern hubs - hub not included Universal bolt pattern, compatible with any 3 or...

Grip features a 1-7/32-inches/32mm diameter 13-inches/365mm Overall diameter Deep-dish design with 1-3/8-inches/35mm distance from the mounting surface to the centerline of the steering wheel grip Central mounting surface is designed to reduce even more weight and can be used on hubs with a 3-...

Hand-stitched ultrasuede grip Ultrasuede center red stripe Marine grade aluminum structure Ergonomic grip Universal bolt pattern, compatible with any 3 or 6 bolt steering wheel hubs Deep dish (depth from center surface to grip) - 55mm Diameter - 345mm Weight: 930g  *** Paddles or...

Description Downloads Designed to use with FuelTech FT550/FT600 on board conditioner, to perform powershifts. Detects knob deformation to perform ignition cut/timing retard H-pattern, sequential or inline application CNC machined *Power shift functions: only compatible with dog engagement gearboxes (Liberty Pro-Shift, Liberty Face Plate, etc.)....

Description Downloads The FuelTech Universal 4 cylinder A harness is a great addition to any 4 cylinder build and can be used with both the FT450 and FT550 ECU’s in a complete plug and play style. It is to suit 4 injectors and 4...