-
FuelTech 3-Way Boost Controller ValveVendor: FuelTechDescription Use with FT600 / FT550 / FT500 / FT500LITE / FT450 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT Can not be used with CO2. For drag race applications, use our Boost Controller Dual Valve Block. Wastegate pressure sensor...
- $54.00
-
- $54.00
- Unit price
- per
-
FuelTech CHT - Cylinder Head Temperature ThermocoupleVendor: FuelTechDescription Downloads The FuelTech Cylinder Head Temperature Thermocouple offers faster and more accurate temperature reading for engine head temperature. The ring tip gives the sensor a lower thermal inertia and easier way to bolt to the head, allowing faster reading during temperature variation of...
- $69.00
-
- $69.00
- Unit price
- per
-
FuelTech Travel SensorVendor: FuelTechThe best way of monitoring your vehicle`s suspension and body movements. Available travel lengths: 0-4", 0-8".Can be used with any FuelTech Power FT ECU. Technical Description 4" Travel Sensor: Total Travel: 4" Length Closed: 9" Length Extended: 13" Mounting: 5mm Heim joints Cable Length:...
- From $349.00
-
- From $349.00
- Unit price
- per
-
FuelTech External MAP Sensor, 10 BarVendor: FuelTechThis sensor is needed if you are exceeding the limit of your internal map sensor on your ECU or want to run an external map sensor on your setup. Reads up to 135.3 psi! Output: 0.5-4.5V Supply: 5V Range: -14.7 psi to +135.3 psi...
- From $175.00
-
- From $175.00
- Unit price
- per
-
FuelTech Temperature Sensor (0-300°F)Vendor: FuelTechHigh quality stainless steel temperature sensor. These sensors are known for their accuracy and can be used in harsh environments. Most commonly used to measure air and fluid temperatures. Supply: Ground Range: 0-300°F Thread size: 1/8" NPT
- From $69.00
-
- From $69.00
- Unit price
- per
-
FuelTech Water Temperature SensorVendor: FuelTechGM style water temperature sensor. Standard water/coolant sensor for all FuelTech ECUs. Thread size: 3/8" NPT
- From $35.00
-
- From $35.00
- Unit price
- per
-
FuelTech Air Temperature SensorVendor: FuelTechGM style intake air temperature sensor. Standard IAT sensor for all FuelTech ECUs. Thread size: 3/8" NPT
- From $30.00
-
- From $30.00
- Unit price
- per
-
FuelTech Throttle Position Sensor (Ford)Vendor: FuelTechFits most aftermarket throttle bodies that accept a "Ford" style throttle position sensor. It is Fitted with a 3 way GM metri-pack style connector. Pin A - Ground (black) Pin B - Signal (green) Pin C - 5v+ (orange)
- From $84.00
-
- From $84.00
- Unit price
- per
-
FuelTech WB-O2 Sensor - AlcoholVendor: FuelTechNTK WB-O2 sensor compatible with our Alcohol O2 conditioner. Designed for high horsepower alcohol combinations. High accuracy and low AFR readings. Thread size: M18 x 1.5
- $699.00
-
- $699.00
- Unit price
- per
-
FuelTech Bosch LSU4.2 WB-O2 SensorVendor: FuelTechBosch LSU4.2 WB-O2 sensor compatible with the following FuelTech products: NanoPRO WB-O2 Nano Alcohol O2 WB-O2 Datalogger WB-O2 Slim Sensor life drastically reduced when used with leaded fuel, diesel or 2 stroke engines. Thread size: M18 x 1.5
- From $79.00
-
- From $79.00
- Unit price
- per
-
FuelTech PS-10B Pressure Sensor (0-10 bar)Vendor: FuelTechTypically used to monitor fuel, oil, and wastegate pressure. *Not compatible with PRO500/PRO600 or other complete FuelTech engine harnesses. Use PS-150 for these applications. TECHNICAL DESCRIPTION Output: 1-5V Supply: 12V Range: 0-10 bar Thread size: 1/8" NPT Connector Pinout: 1 - Signal 2 - Ground 3...
- From $119.00
-
$145.00 - From $119.00
- Unit price
- per
-
FuelTech PS-30 Pressure Sensor (0-30 psi)Vendor: FuelTechDescription Typically used for precise fuel pressure monitoring on carburetor applications. Multiple sensors can be used for multiple stages of wet nitrous fuel pressure monitoring. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-30 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B...
- From $119.00
-
- From $119.00
- Unit price
- per
-
FuelTech SwitchPanel-4 MiniVendor: FuelTechDescription Downloads Keypad with 4 configurable buttons and multicolor backlight SwitchPanel Manual Switchpanel-4 Mini CAD Features SwitchPanel Mini is a compact and multicolor backlight button panel that communicates with the PowerFT line ECUs (FT450, FT500, FT500LITE, FT550 and FT600) through FTCAN 2.0.Using SwitchPanel-4 Mini,...
- $399.00
-
- $399.00
- Unit price
- per
-
FuelTech SwitchPanel-5 MiniVendor: FuelTechDescription Downloads Keypad with 5 configurable buttons and multicolor backlight SwitchPanel Manual SwitchPanel-5 Mini CAD Features SwitchPanel Mini is a compact and multicolor backlight button panel that communicates with the PowerFT line ECUs (FT450, FT500, FT500LITE, FT550 and FT600) through FTCAN 2.0.Using SwitchPanel-4 Mini,...
- $419.00
-
- $419.00
- Unit price
- per
-
FuelTech SwitchPanel-8 MiniVendor: FuelTechDescription Downloads Keypad with 8 configurable buttons and multicolor backlight SwitchPanel Manual SwitchPanel-8 Mini CAD Features SwitchPanel Mini is a compact and multicolor backlight button panel that communicates with the PowerFT line ECUs (FT450, FT500, FT500LITE, FT550 and FT600) through FTCAN 2.0.Using SwitchPanel-4 Mini,...
- $429.00
-
- $429.00
- Unit price
- per
-
FuelTech FT Input ExpanderVendor: FuelTechDescription Downloads Input Expander Module for PowerFT line FT Input Expander Manual Input Expander Module for PowerFT line (FT500 / FT500LITE / FT450 / FT550 / FT550LITE / FT600), with 20 inputs for sensor readings such as (pressure, flow, temperatures, position and activation of...
- From $599.00
-
- From $599.00
- Unit price
- per
-
FuelTech EGT-4 CANVendor: FuelTechDescription Downloads 4 channel conditioner for Type K thermocouples with CAN communication for PowerFT ECU's. EGT-4 CAN Manual FEATURES The FuelTech EGT-4 CAN is compatible with any type K thermocouple (grounded junction or not). 4 channel signal conditioner with CAN bus communication for PowerFT...
- From $399.00
-
- From $399.00
- Unit price
- per
-
FuelTech NanoPROVendor: FuelTechDescription Downloads Harness & sensor options not included, see options below.The evolution in O2-sensor conditioners. With a new design, the FuelTech NanoPRO is able to condition and read 5 different models of wide band lambda O2 sensors:● BOSCH LSU 4.2 (sensor, harness)● BOSCH LSU...
- $339.00
-
$349.00 - $339.00
- Unit price
- per
-
FuelTech FT450 EFI SystemVendor: FuelTechDescription Downloads ECU electronic injection system in automotive vehicles. The FT450 is a FuelTech engine monitoring and control system: electronic injection, integrated instrument panel, data acquisition and power management. FT450 Manual FTManager Software FT450 CAD
- From $899.00
-
$899.00 - From $899.00
- Unit price
- per
-
FuelTech FT600 EFI SystemVendor: FuelTechDescription Downloads A FT600 is FuelTech’s most advanced engine control and monitoring system. It is an ECU, dashboard, data acquisition and power management system! FT600 Manual FTManager Software FT600 CAD
- From $2,699.00
-
- From $2,699.00
- Unit price
- per
