-
Blox Racing Tuner Series 70mm and 72mm Dual Pattern Throttle Body - Honda K-SeriesVendor: Blox RacingBlox Racing Tuner Series throttle body featured here is cast from high quality aluminum. In addition, precision machined butterfly plates proper and consistent opening and closing. New throttle springs provide crisp response each time the engine is revved. The IACV can be used or...
- $176.00
-
$220.00 - $176.00
- Unit price
- per
-
Blox Racing Universal N1 Muffler - Straight TipVendor: Blox RacingBLOX Racing straight tip N1 mufflers are manufactured from T-304 stainless steel and then robotically TIG-welded to ensure each muffler passes stringent quality control. N1 mufflers are available in 60.5mm, 63.5mm, and 76.2mm inlet sizes. These universal, high performance mufflers are fully polished and...
- $112.00
-
$140.00 - $112.00
- Unit price
- per
-
Blox Racing Universal Street Muffler - Turndown TipVendor: Blox RacingBLOX Racing universal turndown mufflers are manufactured from T-304 stainless steel and robotically TIG-welded. Turndown mufflers are available in 2.5", 3" and 3.5". Each application feature a 4-section turndown tip measuring at 3.5". The piecut tip is cut at 40-degrees. Each muffler is of...
- From $192.00
-
$240.00 - From $192.00
- Unit price
- per
-
Blox Racing Velocity Stack - CompositeVendor: Blox RacingBLOX Racing velocity stacks incorporate race proven intake technology into a product designed for daily driven vehicles. Velocity stacks are designed to optimize and maximize air flow rates entering the induction system. BLOX Racing velocity stacks are ideal for naturally aspirated and turbocharged applications. ...
- $36.00
-
$45.00 - $36.00
- Unit price
- per
-
Blox Racing VTEC Solenoid Cover - SmallVendor: Blox RacingDress up your engine bay with this high quality, billet aluminum VTEC solenoid cover. These show quality VTEC solenoid covers are available in small. Each is anodized for a durable and long lasting finish. Engine Applications Honda D-series SOHC VTEC (USDM) Honda B-series DOHC...
- From $20.00
-
$25.00 - From $20.00
- Unit price
- per
-
Blox Racing Xtreme Titanium Intake/Exhaust Manifold Studs - Raw and BurntVendor: Blox RacingBLOX Racing intake and exhaust studs are made using from Ti 6Al-4V. Each stud features precision threads and includes a washer and 12-point hex nut. The titanium material provides excellent durability and protection from extreme heat and wear. BLOX Racing titanium intake and exhaust studs stop corrosion and...
- From $11.20
-
$14.00 - From $11.20
- Unit price
- per
-
Raw
-
Burnt
-
Blox Racing 02 BungVendor: Blox RacingBLOX Racing offers a full line of DIY performance parts. BLOX Racing oxygen sensor bungs and fitting caps are available for any custom header or exhaust system requiring sensors or custom mounting locations. Bungs are available in 1018 mild steel or T304 stainless steel....
- From $6.40
-
$8.00 - From $6.40
- Unit price
- per
-
Blox Racing 02 Bung & Cap KitVendor: Blox RacingBLOX Racing offers a full line of DIY performance parts. BLOX Racing oxygen sensor bungs and fitting caps are available for any custom header or exhaust system requiring sensors or custom mounting locations. Each is made out of T304 stainless steel.
- $14.40
-
$18.00 - $14.40
- Unit price
- per
-
Blox Racing 02 Bung FittingVendor: Blox RacingBLOX Racing offers a full line of DIY performance parts. BLOX Racing oxygen sensor bungs and fitting caps are available for any custom header or exhaust system requiring sensors or custom mounting locations. Each bung plug/fitting is made out of T304 stainless steel. Sold...
- $8.00
-
$10.00 - $8.00
- Unit price
- per
-
Blox Racing 1000cc Honda B,D,H,F-Series InjectorsVendor: Blox Racing*These injectors are for Street Applications* Injector Specs Pre-assembled injectors for Honda B, D, H, F-Series applications Shortie - 38mm injector size, 11mm bore Standard - 48mm injector size, 11mm bore High impedance Not recommended for racing Not compatible with e85 or methanol Fuel injectors are tested at...
- From $60.00
-
$75.00 - From $60.00
- Unit price
- per
-
Blox Racing 1000cc Honda K-Series / 06-09 S2000 InjectorsVendor: Blox Racing*These injectors are for Street Applications ONLY* Injector Specs Pre-assembled injectors for Honda K-Series and 06-09 S2000 applications Shortie - 38mm injector size, 14mm bore Standard - 48mm injector size, 14mm bore High impedance Not recommended for racing Not compatible with e85 or methanol Fuel injectors are tested...
- From $60.00
-
$75.00 - From $60.00
- Unit price
- per
-
Blox Racing 12p17 Tuner Extended Lug Nut (Single)Vendor: Blox RacingThe BLOX Racing 12p17 Tuner lug nut fits OEM and aftermarket wheels requiring 17mm lug nuts. The open-end design makes these lugs ideal for use with extended wheel studs. The 12p17 lug nuts are cold extruded from high grade steel and feature our own...
- $4.00
-
$5.00 - $4.00
- Unit price
- per
-
Blox Racing 12p17 Tuner Extended Lug Nut (Single)Vendor: Blox RacingThe BLOX Racing 12p17 Tuner lug nut fits OEM and aftermarket wheels requiring 17mm lug nuts. The open-end design makes these lugs ideal for use with extended wheel studs. The 12p17 lug nuts are cold extruded from high grade steel and feature our own...
- $4.00
-
$5.00 - $4.00
- Unit price
- per
-
Blox Racing 1300cc Honda B,D,H,F-Series InjectorsVendor: Blox Racing*These injectors are for Street applications* Injector Specs Common Honda B/D/H/F-series engine applications Based on 48mm injector size, 14mm bore Includes 1/2" adapter top, 11mm bore Includes O-rings, EV14 pigtails Fuel injectors are tested at the following: 43.5 PSI (3 Bar) 13.8 Volts 100...
- From $64.00
-
$80.00 - From $64.00
- Unit price
- per
-
Blox Racing 1300cc Honda K-Series / 06-09 S2000 InjectorsVendor: Blox Racing*These injectors are for Street applications* Injector Specs Common Honda K-series and 06-09 S2000 engine applications Based on 48mm injector size, 14mm bore Includes O-rings, EV14 pigtails High impedance Not recommended for racing Not compatible with e85 or methanol Fuel injectors are tested at the following:...
- From $64.00
-
$80.00 - From $64.00
- Unit price
- per
-
Blox Racing 2-Hole MLS Exhaust Gasket - 3.0"Vendor: Blox RacingBLOX Racing’s line of MLS stainless steel gaskets are the perfect solution for inferior turbo and exhaust gaskets that do not properly seal or end up breaking apart and causing leaks. BLOX MLS gaskets are heavy duty and are intended to withstand the rigors...
- $14.40
-
$18.00 - $14.40
- Unit price
- per
-
Blox Racing 21mm Rear Sway Bar Kit - 2006-2011 Civic SiVendor: Blox RacingBLOX Racing sway bars are designed and manufactured to greatly improve the vehicle's handling, reduce body roll, as well as, increase the vehicle’s lateral stiffness. Each sway bar is made from SAE 9254 spring steel, shot-peened and heat treated, and feature precision forged ends...
- $172.00
-
$215.00 - $172.00
- Unit price
- per
-
Blox Racing 2200cc Honda B,D,H,F-Series InjectorsVendor: Blox Racing*These injectors are for Street Applications* Injector Specs Pre-assembled injectors for Honda B, D, H, F-Series applications 38mm injector size, 11mm bore High impedance Not recommended for racing Not compatible with e85 or methanol Fuel injectors are tested at the following: 43.5 PSI (3 Bar) 13.8...
- From $112.00
-
$140.00 - From $112.00
- Unit price
- per
-
Blox Racing 2200cc Honda K-Series / 06-09 S2000 InjectorsVendor: Blox Racing*These injectors are for Street applications* Injector Specs Pre-assembled injectors for Honda K-Series and 06-09 S2000 applications 38mm injector size, 11mm bore High impedance Not recommended for racing Not compatible with e85 or methanol Fuel injectors are tested at the following: 43.5 PSI (3 Bar) 13.8...
- $112.00
-
$140.00 - $112.00
- Unit price
- per
-
Blox Racing 26mm Front Sway Bar Kit - 1999-2000 Civic SiVendor: Blox RacingBLOX Racing sway bars are designed and manufactured to greatly improve the vehicle's handling, reduce body roll, as well as, increase the vehicle’s lateral stiffness. Each sway bar is made from SAE 9254 spring steel, shot-peened and heat treated, and feature precision forged ends...
- $172.00
-
$215.00 - $172.00
- Unit price
- per
Race Now Pay Later With Shop Pay Installments!
Trending Now
Racewerx Products
Vendor:
Racewerx
Using factory intake manifold bolts and studs, especially when paired with an aftermarket intake manifold or thermal gasket, can lead to issues like stripped or broken bolts and loose fastening, resulting in leaks. But our stud kit is here to simplify things. This kit...
- From $74.99
-
- From $74.99
- Unit price
- / per
Vendor:
Racewerx
Introducing the Racewerx Tucked K-Series Engine Harness — the pinnacle of engineering excellence for your K-series engine. Our Tucked K-Swap Engine Harness is meticulously designed as a high-quality replacement for the 02-04 RSX Type-S styled harness, offering a supremely clean aesthetic while compatible with...
- $448.99
-
$499.99 - $448.99
- Unit price
- / per
Vendor:
Racewerx
Introducing Racewerx Titanium Steering Wheel Bolts – the perfect blend of form and function for your vehicle's interior upgrade. Crafted from top-grade Titanium, these bolts offer a sleek and modern appearance that will instantly enhance your steering wheel's aesthetics. But it's not...
- $28.95
-
$34.99 - $28.95
- Unit price
- / per
Close
Sidebar
- Choosing a selection results in a full page refresh.